Return and Warranty Terms
1. Return Policy
1.1 Definitions of Product Conditions
Disclaimer: 4D Controls is not affiliated with or authorised by the manufacturer to act as a reseller or distributor of these products unless explicitly stated. All 4D products, under any of the following conditions, do not fall under the manufacturer’s warranty.
(a)剩bobty体育入口最新版APP余密封包装(SSP) -未使用和original factory sealed packaging, but the packaging may have markings, signs of discolouration or wear with an older date code and/or require firmware or hardware revision.
(b) Surplus Open Package (SOP) – Unused and in original factory packaging, but the packaging was opened or the factory seal is missing (if applicable), or the product may be in replacement packaging. Packaging may have markings, signs of discolouration or wear. These items may be an older version or design.
(c) Surplus No Box (SNB) – The product has not been put into service but is repackaged in 4D Controls packaging. SNB may not include manual(s) or other accessories normally supplied when buying SSP or SOP. Products in this category may be part of an older series, style, weathered, or discoloured.
(d) Used in 4D Controls Packaging (UPP) – The product has been previously used but has undergone testing and repair by our technicians prior to shipment. The product is packaged in 4D Controls packaging, but may not come with documentation and accessories normally supplied when buying SSP or SOP. Products in this category may be part of an older series, style, weathered, or discoloured.
1.2 Non-Warranty Returns
(a) If Customer is dissatisfied with any SOP, SNB, or UPP product purchased from 4D Controls, Customer may return the product within thirty (60) calendar days of the invoice date. A 30% restocking fee will apply to all non-warranty returns. 4D Controls does not accept returns of SOP, SNB, or UPP products based on the date manufactured or the cosmetic condition of the product or packaging. Refunds of SOP, SNB, or UPP products will be issued only upon receipt and testing.
(b) All SSP, SOP, and SNB products sold by 4D Controls are subject to the return policy of the source from which the part was obtained. These sources vary and as a result, the ability to return items will also vary. Some sources consider items to be non-cancellable/non-returnable after the purchase order is placed, yet others may allow returns with an applicable restock charge. Please ask your 4D Controls sales representative at the time of the order if concerned about your ability to return the item. 4D Controls will attempt to accommodate any cancellations or returns, but any charges will be incurred by the customer.
(c) Non-warranty returns will only be accepted within thirty (60) calendar days of the invoice date. If the customer needs to make a non-warranty return claim please contact 4D Controls at[email protected]or call 1300 731 156 (Australia) or +61 2 4016 0268 (international); for a Return Request Number (“RRN”) prior to any return.
(d) All items must be returned in purchased condition and accompanied by an RRN number.
2. Surplus Warranty Return Policy
2.1 4D Controls warrants that the good(s) sold pursuant to a particular order (“Goods”) shall be free from defects in materials and workmanship for a period of two (2) years from the date the customer is invoiced for the Goods (“the Warranty Period”). The foregoing warranty shall only be applicable to Goods stored, installed, handled, operated, or otherwise used under normal conditions.
2.2 All warranties issued are provided by 4D Controls, not the manufacturer. All warranties issued herein are non-transferable without 4D Controls prior written consent.
2.3 If, during the Warranty Period, a customer wishes to make a claim under Section 2.1 (“Warranty Claim”), the customer shall provide notice using the following methods:
(a) Email:[email protected];
(b) Phone: 1300 731 156 (Australia) or +61 2 4016 0268 (international);
2.4 Upon receipt of a Warranty Claim, 4D Controls will issue a Return Request Number (“RRN”). 4D Controls will not accept any Warranty Claim without a valid RRN.
2.5 Freight and rush fees for Goods returned under Warranty Claims shall remain the responsibility of the customer.
2.6 4D Controls obligation shall be limited to the repair or replacement, in 4D Controls sole discretion, of any such Good (or part/component thereof as 4D Controls determines) free of charge to the customer. If 4D Controls determines that the Good cannot be repaired or replaced, 4D Controls shall credit the customer’s account in an amount equal to the sum the customer paid for it.
2.7任何保修索赔之前,必须接受end of the Warranty Period, together with return of the Good within this same period, and must include 4D Controls RRN number.
2.8 This warranty is given in lieu of any other warranties, either express or implied, including that 4D Controls disclaims any warranty of merchantability, fitness for a particular purpose and/or non-infringement. In no event shall 4D Controls be liable for any damages except actual damages up to, but not exceeding, the amount customer paid to 4D Controls for the particular equipment. Further, 4D Controls shall not be liable for any special damages including consequential damages, incidental damages, lost profits, or lost revenue.
3. Repaired Products:
Items repaired by 4D Controls may not be covered by the manufacturer’s repair warranty. 4D Controls is not an affiliated service centre with any manufacturer unless explicitly stated. However, the item is covered by 4D Controls 2-Year Warranty, the terms of which are set forth below.
3.1 4D Controls warrants that the components repaired pursuant to a particular repair order (“Repaired Goods”) shall be free from defects in materials and workmanship for a period of two (2) years from the date the customer is invoiced for the Repaired Goods (“the Warranty Period”). The foregoing warranty shall only be applicable to Repaired Goods stored, installed, handled, operated, or otherwise used under normal conditions.
3.2 All warranties issued are provided by 4D Controls, not the manufacturer. All warranties issued herein are non-transferable without 4D Controls prior written consent.
3.3 If during the Warranty Period, a customer wishes to make a claim under Section 3.1 (“Warranty Claim”), the customer shall provide notice using the following methods:
(b) Phone: 1300 731 156 (Australia) or +61 2 4016 0268 (international);
3.4 Upon receipt of a Warranty Claim, 4D Controls will issue a Return Request Number (“RRN”). 4D Controls will not accept any Warranty Claim without a valid RRN.
3.5 Freight and rush fees for goods returned under Warranty Claims shall remain the responsibility of the customer.
3.6 bob链接- 4 d控制义务应当限于repair or replacement, in 4D Controls sole discretion, of any such Repaired Good (or part/component thereof as 4D Controls determines) free of charge to our customer. If 4D Controls determines that the Repaired Good cannot be repaired or replaced, 4D Controls shall credit the customer’s account in an amount equal to the sum paid for the Services.
3.7 Any warranty claim must be received before the end of the Warranty Period, together with return of the Good within this same period, and must include 4D Controls RRN number.
3.8 This repair warranty does not apply to goods repaired pursuant to a Warranty Claim authorized by Section 2 or 4.
3.9 This warranty is given in lieu of any other warranties, either express or implied, including that 4D Controls disclaims any warranty of merchantability, fitness for a particular purpose and/or non-infringement. In no event shall 4D Controls be liable for any damages except actual damages up to, but not exceeding, the amount paid to 4D Controls for the Repaired Good. Further, 4D Controls shall not be liable for any special damages including consequential damages, incidental damages, lost profits, or lost revenue.
4. SSP Warranty Returns
4D Controls is not affiliated with or authorised by the manufacturer to act as a distributor of these products unless explicitly stated. As a result, SSP items purchased from 4D Controls Pty Ltd are not covered under the manufacturer’s warranty. However, your purchases are covered by the 4D Controls 2-Year Warranty, the terms of which are set forth below.
4.1 bob链接- 4 d控制企业有限公司(“4 d控制”)权证that the good(s) sold pursuant to a particular order (“Goods”) shall be free from defects in materials and workmanship for a period of two (2) years from the date the customer is invoiced for the Goods (“the Warranty Period”). The foregoing warranty shall only be applicable to Goods stored, installed, handled, operated, or otherwise used under normal conditions.
4.2 All warranties issued are provided by 4D Controls, not the manufacturer. All warranties issued herein are non-transferable without 4D Controls prior written consent.
4.3 If during the Warranty Period, a customer wishes to make a claim under Section 4.1 (“Warranty Claim”), the customer shall provide notice using the following methods:
(a) Email:[email protected];
(b) Phone: 1300 731 156 (Australia) or +61 2 4016 0268 (international);
4.4 Upon receipt of a Warranty Claim, 4D Controls will issue a Return Request Number (“RRN”). 4D Controls will not accept any Warranty Claim without a valid RRN.
4.5 Freight and rush fees for goods returned under Warranty Claims shall remain the responsibility of the customer.
4.6 4D Controls obligation shall be limited to the repair or replacement, in 4D Controls sole discretion, of any such Good (or part/component thereof as 4D Controls determines) free of charge to the customer. If 4D Controls determines that the Good cannot be repaired or replaced, 4D Controls shall credit the customer’s account in an amount equal to the sum paid for it.
4.7 Any warranty claim must be received before the end of the Warranty Period, together with return of the Good within this same period, and must include 4D Controls RRN number.
4.8 This warranty is given in lieu of any other warranties, either express or implied, including that 4D Controls disclaims any warranty of merchantability, fitness for a particular purpose and/or non-infringement. In no event shall 4D Controls be liable for any damages except actual damages up to, but not exceeding, the amount paid to 4D Controls for the Good. Further, 4D Controls shall not be liable for any special damages including consequential damages, incidental damages, lost profits, or lost revenue.
5. Other Terms:
5.1 All sales and services are presumed to have taken place in Rutherford, NSW and those above-described warranties provided by 4D Controls Pty Ltd. shall be construed under Australian law, without regard to conflict of law provisions. Venue for any dispute arising hereunder shall be in that State or Federal Court nearest to the main office of 4D Controls Pty Ltd. The parties hereby agree to personal jurisdiction over them in such Courts.
5.2 Customer warrants that it is and shall remain in full compliance with any applicable Australian, State and/or local regulations controlling the sale and delivery of goods for export and is and shall remain solely responsible therefore. The terms set forth herein constitute the entire agreement regarding this transaction, except for product and/or service description and pricing, and subject only to our credit agreement (if any) with Customer, our invoice and our separate order confirmation.
5.3 In the event any part of these terms is deemed unenforceable by a court having jurisdiction there over, such unenforceable term(s) shall be modified to make them as enforceable as possible, and the rest of these terms shall not be affected. Any contrary terms offered by the Customer are not a part of this transaction. Customer shall defend, indemnify and hold 4D Controls Pty Ltd and its agents harmless from any breach by it of these terms or any misuse or abuse by it of any item sold and/or serviced hereby.
5.4 The goods sold hereunder shall be at the risk of the Customer upon delivery by 4D Controls to the carrier F.O.B. shipping point. Title to the goods sold hereunder shall remain in Seller until payment in full by Buyer.
5.5 4D Controls shall not be responsible for delays caused by manufacturing plants, transportation, strikes, fires, floods, storms, war, insurrections, riot, any governmental regulation, order, act or instruction, or any other circumstances beyond its control, and Customer hereby waives any claims relating to same.
5.6 Should any part of this transaction contravene Australian Export laws, this transaction shall be immediately void and unenforceable.
5.7 No amendment to, rescission, termination, cancellation or discharge of this Agreement is effective unless it is in writing and signed by each party to this Agreement. Neither party may assign any of its rights under this Agreement without the prior written consent of the other party. If any term or provision of this Agreement is invalid, illegal or unenforceable in any jurisdiction, such invalidity, illegality or unenforceability shall not affect any other term or provision of this Agreement or invalidate or render unenforceable such term or provision in any other jurisdiction. Any waiver authorized on one occasion is effective only in that instance and only for the purpose stated, and does not operate as a waiver on any future occasion. Any failure or delay in exercising any right, remedy, power or privilege or in enforcing any condition under this Agreement; or any act, omission or course of dealing between the parties does not constitute a waiver or estoppel of any right, remedy, power, privilege or condition arising from this Agreement.